From: Prepared by:
1、原材料信息/ Material Information
4、测量数据/Measured data
Bend half-and-half cut open
R38
Thickness Inspection Point
Thickness Inspection Point
检测数据依据图编号，依次对每批次炉号测量三只弯管，测量数据见表（弯管内侧壁厚需解剖后测量）： Testing data according to the drawing number, each heat No. measuring three bends. Data shows in the table. (Inside thickness data needs cutting)
*厚度数据仅供参考/The thickness data is for reference only.
6、结论 Result
对成品尺寸按要求进行测量，符合标准要求。
Measured size is consistent with the standards requirement.
●
目录/Content{ TC \* MERGEFORMAT }
1、原材料信息/ Material Information . ......................................................................................................... 1 2、弯制过程/ The bending process . ........................................................................................................... 1 3、尺寸检测/Dimension Inspection . ........................................................................................................... 2 4、测量数据/Measured data ...................................................................................................................... 4 5、掰开后PT 检测/ PT test After opening the bends.................................................................................12 6、结论 Result . ........................................................................................................................................ 12
● 附件1 PT报告/Annex 1 PT report
● 附件2 热处理曲线/Annex 2 Heat treatment ● 附件3 硬度测试/Annex 3 Hardness test